Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Killeen Homeowners
Chimney repair in Killeen usually starts with something small: a cap that blew loose in a spring storm, a crown that cracked through a run of hot, dry weeks, or flue tiles that spalled after a season of heavy burning. Those are the problems worth catching before they turn into a rebuild.
We’re a dedicated chimney specialist, not a generalist outfit that added chimney work to a long menu. Sweeping, repair, and inspection are what we do, which means the same visit that finds a cracked crown can also scope the liner and document it on camera. Our technicians have up to 11 years of experience, and we work with trade-recognized brands like HeatShield, DuraFlex, Gelco, and Olympia Chimney rather than whatever a big-box shelf happens to carry.
Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when a repair can safely wait. Same-day service is often available. Call (866) 942-9240. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Repairs are quoted from camera inspection, not guesswork.
- HeatShield resurfacing can restore many deteriorated flues without full demolition.
- DuraFlex flexible liner systems are available for relining work.
- You get a written estimate before any work begins.
- Licensed and insured, with a single trade focus on chimneys.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a screened metal or stainless cap over the flue opening, and it’s the cheapest form of protection a Killeen chimney gets. You need one when the flue is open to the sky, when an old cap has rusted through, or when birds and squirrels have found their way in. In this part of Central Texas, an open flue takes in rain during spring storms and, just as damaging, gives hot, dry-season air a clear path into the chimney cavity along with leaves and grit. A proper cap keeps weather, animals, and debris out while still letting exhaust escape freely.
We measure the flue and the crown before fitting anything, because a cap that sits loose rattles in wind and one that’s sized wrong blocks draft. We fit stainless and powder-coated caps, and our technicians have up to 11 years of experience with the fitments. Expect a typical installed cap to run somewhere in the $180 to $450 range, with the size and material of the flue driving the final figure. The written estimate sets the price.
Single-Flue and Multi-Flue Fits
A single-flue masonry chimney takes a straightforward cap, and the job is usually quick once the flue is measured. Multi-flue stacks need a custom-sized cap or individual caps per flue, which changes the hardware and the labor. We check the crown condition at the same time, since a cap bolted to a failing crown won’t hold.
Why Screen Mesh Matters
The screen is what keeps birds, squirrels, and wasps out of the flue, and it’s often the first part to fail. Rust-through or a torn mesh lets animals nest in the flue, which narrows the passage and creates a real draft problem. We fit mesh sized to keep out the animals that actually get into Killeen attics and chimneys, not a generic screen.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is the swap-out of a cap that’s failed: rusted legs, a corroded top, a torn screen, or one that’s simply the wrong size for the flue. You need it when the old cap has started to sag, when it’s been pushed loose by wind, or when a previous fit was never right to begin with. A loose cap lets water run down the flue and lets animals in. The cost of a replacement is far below the cost of the water damage or a nest removal that follows.
We service all common cap types and will tell you honestly whether a repair or a full replacement makes more sense. Where the cap is salvageable we’ll say so. Where it’s not, we fit stainless or powder-coated hardware and seal the base. Most single-flue replacements land somewhere around $180 to $450 installed, depending on the flue size and cap type. The written estimate sets the final price.
Spotting a Rusted-Through Cap
Look for flakes of rust on the roof or in the firebox, or a cap that’s started to lean. Rust does its worst work on the legs and the base, which is where the cap loses its grip on the crown. If the paint or powder coating has failed on the top, water gets in and the whole cap rusts from the inside.
Matching the Cap to the Flue
An undersized cap sits loose and blocks nothing. An oversized one can trap smoke and cut draft. We measure the actual flue opening and fit to it, whether it’s a round liner top or a rectangular masonry flue. The right fit is what makes a cap last.
Chimney Liner Installation
Chimney Liner Installation is the fitting of a new flue liner inside the existing chimney chase, and it’s the right answer when the original clay tiles are cracked, spalled, or separated. You need it when the inspection finds gaps that would let heat, embers, or carbon monoxide reach the surrounding framing. It’s the most technical repair we do, and it’s the one that most separates a real chimney specialist from a generalist crew. A cracked liner isn’t a cosmetic issue.
We install DuraFlex flexible liner systems, which are purpose-built for relining and require specialized tooling and training to run correctly. The process starts with a camera inspection of the full flue, then a measurement, then the liner is pulled into place and connected at the top and the appliance. A typical reline runs roughly $2,400 to $5,500 or more, depending on liner length, diameter, and whether insulation is added. The written estimate sets the final price. Our technicians have up to 11 years of experience with relining work.
When Relining Can’t Wait
A liner with gaps or cracks lets combustion products reach the chimney’s exterior structure. That’s a fire path. If you’ve had a chimney fire, or if the inspection shows separated tiles, relining is the repair. We won’t build a fire in a chimney we know is compromised, and we’ll show you the camera footage.
Flexible Liner vs. Cast-in-Place
A flexible stainless liner follows the existing chase and is the common approach for a masonry chimney with a sound structure. Cast-in-place lining is a different method used when the existing tiles are too damaged to clean and prep for a flexible liner. HeatShield resurfacing serves a separate purpose: restoring the flue surface without demolition. We’ll match the method to the condition we find on camera.
Chimney Flashing Repair
Chimney Flashing Repair is the correction of the metal and sealant where the chimney meets the roof, and it’s the single most common source of chimney leaks. You need it when you see staining on the ceiling or the framing near the chimney, or when a roofer or inspector has flagged loose, rusted, or missing flashing. In Killeen, a hard rain during storm season finds every gap in the flashing.
We inspect the flashing as part of any chimney repair visit, and we repair or replace the step flashing, the apron, and the counter-flashing that ties the chimney into the roof. The repair is done in coordination with the roof covering, and we don’t take the roof itself on. Most flashing repairs fall somewhere in the $250 to $850 range, depending on the extent of the metal work and the roof pitch. The written estimate sets the final price.
Water Stains Near the Chimney
A wet stain on the ceiling or the wall around the chimney is the classic flashing symptom. It shows up after heavy rain and may dry between storms, which is why it gets ignored. Left alone, the water rots framing and the sheathing around the chimney. A camera inspection of the attic side confirms where the water is entering.
When the Leak Is the Crown Instead
Not every chimney leak comes from the flashing. A cracked crown lets water into the flue and runs it down the interior. If you have staining near the top of the chase rather than the ceiling, the crown or the cap may be the culprit. The inspection tells you which.
Chimney Crown Repair
Chimney Crown Repair is the repair of the concrete or mortar top that sheds water away from the chimney walls, and a failing crown is one of the quietest causes of chimney damage. You need it when the crown has cracked, pulled away from the flue, or eroded to a rough, porous surface. Once the crown stops shedding water, the chimney brickwork soaks it up, and a crown problem quietly becomes a masonry problem. Killeen’s hot, dry summers followed by storm season put real stress on an exposed concrete top.
We repair crowns with proper sloping and sealing, and where the crown is too far gone we rebuild it. We also use HeatShield resurfacing for the flue interior where the crown repair has exposed a deteriorated flue lining. A crown repair generally runs somewhere in the $300 to $900 range, with the size of the chimney top and the extent of the rebuild driving the figure. The written estimate sets the final price.
Cracks, Spalling, and Erosion
A hairline crack in the crown widens through repeated wetting and drying. Spalling shows as flakes of the top surface lifting away, and the surface erodes to a rough finish that holds water rather than shedding it. Any of these mean the crown needs attention before the next wet season.
Why a Flat Crown Causes Trouble
A crown needs a slope, however slight, so water runs off and not into the flue. Some older chimneys were built with a flat or poorly sloped top, and the ponding water finds the mortar joints. We restore the slope as part of the repair rather than just patching the visible crack.
Chimney Repair Companies
Chimney Repair Companies vary more than most homeowners expect, and the difference shows up in how they diagnose. You need to compare them when the first quote you get is a four-figure liner job with no camera evidence to back it up. Our technicians have up to 11 years of experience and work only on chimneys. That’s the trade we know, and their focus means every visit is chimney-specific rather than a stop between a roofing job and an HVAC call.
We back up the diagnosis with a camera inspection and a photo report you can review yourself. Nothing is recommended without the footage to prove it. We work with trade-recognized brands including HeatShield, DuraFlex, Gelco, and Olympia Chimney, and we’ll tell you when a repair can wait. A typical diagnosis visit and written estimate runs on a per-job basis, with small repairs in the $250 to $850 range and larger structural work quoted separately. The written estimate sets the final price. Call (866) 942-9240 to book one.
Questions to Ask Any Chimney Specialist
Ask whether they’ll provide camera footage, whether they’ll put the recommendation in writing, and what they’d recommend if the chimney were theirs. A specialist will welcome all three. A crew that flinches at the camera question is telling you something.
The Value of a Single-Trade Focus
A company that only works on chimneys sees the same failure patterns every week, which sharpens diagnosis. Generalists handle chimneys occasionally and may miss a crown problem while fixing the flashing. Focus is what makes the diagnosis faster and the repair right the first time.
Chimney Masonry Repair
Chimney Masonry Repair is the correction of damaged brick, mortar joints, and the masonry structure above and below the roof line, and it’s the repair most often deferred until water damage forces it. You need it when the mortar joints have crumbled and dropped out (pointing that’s worn away), when bricks are spalling or loose, or when the chimney has begun to lean. Water is the enemy here, and Killeen’s storms and dry spells work on mortar joint by joint.
We repoint worn mortar joints, replace spalled brick, and re-establish the crown slope so the masonry sheds water again. We don’t take on the roof or the rest of the house, and our focus is the chimney chase and the crown. Masonry repair usually runs somewhere in the $450 to $1,800 range or more, driven by the height of the chimney and the number of joints involved. On some jobs we can use HeatShield resurfacing to restore the interior flue surface instead of rebuilding it. The written estimate sets the final price.
Crumbling Mortar Joints
When mortar joints recede, the bricks lose their bond and water gets behind them. Repointing replaces that mortar with fresh material matched to the original. The repair is cheaper and less disruptive than a full rebuild, and it needs to happen before the bricks loosen.
Spalled Brick and Leaning Chases
Spalling is the face of a brick flaking away, usually from repeated wetting and drying. If the chimney has started to lean, get it inspected promptly. A leaning chase may need more than cosmetic repair, and the inspection tells you what’s structural.
Brands We Service
We work with HeatShield, the chimney resurfacing product designed specifically to restore deteriorated flue tiles without full demolition. HeatShield is how we fix a flue interior that a generalist would tell you to tear out and rebuild. We know where HeatShield will hold and where a different method is needed, and we won’t oversell the resurfacing when the flue condition genuinely calls for relining.
We install DuraFlex flexible liner systems, which are the trade-standard approach to relining a masonry flue, and we work with Gelco and Olympia Chimney products for the parts of a chimney repair that need purpose-built components. We also fit Famco and Copperfield hardware. All of it comes from professional supply chains, not big-box shelves. Whether you have HeatShield-resurfaced flues, a DuraFlex liner, or anything else, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or walls near the chimney. This is the most common sign of a flashing or crown failure. Water finds its way in during one storm and does its damage over weeks. Call for an inspection to find the entry point.
- White, chalky stains on the exterior brick. This is efflorescence, a sign that moisture is moving through the masonry. It doesn’t mean the chimney is failing, but it means water is getting in and should be traced.
- A strong smoky smell or poor draft. A blocked or partially blocked flue and a damaged liner can both reduce draft. If the smell lingers after a fire, or the smoke rolls into the room, get the flue inspected before the next burn.
- Cracked or missing mortar joints and spalling brick. Crumbling mortar and flaking brick faces mean the masonry needs attention. The longer it waits, the more joints need repointing.
- Loose, rusted, or torn caps and flashing. A cap that’s shifted, or flashing that’s lifted away from the masonry, is a direct path for water and animals. Both are fast repairs when caught early.
Our Process, Step by Step
- 1
Book and ask questions. We ask what you’ve noticed, when you last burned, and whether anyone has flagged a problem before. That shapes what we look for and how much time we budget. We answer 24/7 to take the call.
- 2
Free written estimate. You get a written estimate before any work begins. It lists the scope and the price, and the estimate is the price. Nothing gets added later without your approval.
- 3
Camera inspection of the flue and the exterior. We run a camera down the flue and inspect the crown, cap, flashing, and masonry from the roof. The footage shows what we find, and we share it with you rather than just describing it.
- 4
The diagnosis, with evidence. We explain what the footage shows, what each finding means, and what happens if it waits. If a repair can safely wait, we’ll say so. You get photos and the camera record.
- 5
The repair, then a re-check. We perform the repair and re-inspect the work before we close the job. You leave with a clear record of what was done and what to watch for next season. Call (866) 942-9240 to get started.
How Much Does Chimney Repair Cost in Killeen?
Chimney repair in Killeen typically runs from about $180 for a cap replacement to $5,500 or more for a full reline, with most repairs landing in the $250 to $1,800 range. The written estimate you get after the camera inspection sets the final price. Nothing is quoted off a phone description alone.
| Repair | Typical estimated range |
|---|---|
| Chimney cap installation or replacement | $180-$450 |
| Flashing repair | $250-$850 |
| Crown repair | $300-$900 |
| Masonry repointing and brick repair | $450-$1,800+ |
| Liner installation (reline) | $2,400-$5,500+ |
What affects the price: the height and reach of the chimney, the extent of the damage, the number of flues, and whether the repair calls for a purpose-built component like a liner. Flue resurfacing with HeatShield is usually less expensive than a full reline, and we’ll tell you which one the flue condition actually allows.
How to avoid overpaying: ask for the camera footage, ask for the recommendation in writing, and ask what happens if the repair waits. If a quote for thousands of dollars of liner work arrives without evidence, get a second inspection. We’ll walk you through what we find and the cost of leaving it. Our process includes a free estimate and a photo report, and a repair that can safely wait gets told to wait. Call (866) 942-9240 for an exact quote; estimates are free.
Our Service Area Near Killeen
We book chimney repair across Killeen and the surrounding communities: Fort Hood, Harker Heights, Nolanville, Copperas Cove, Belton, Morgan’s Point Resort, Temple, Sonterra, and Kempner. Most of these are reachable for a booked visit on the same schedule, and we coordinate the appointment with you rather than leaving a window open. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If you’re outside Killeen, look at our chimney repair page or call to confirm availability. You can also read about chimney repair nearby.
Serving Killeen, TX – Our Local Coverage Area
We serve Killeen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Killeen
Chimney repair covers any fix to the chimney’s structure or its parts: the cap, the crown, the flashing, the masonry, and the flue liner. It’s distinct from a sweep (cleaning) and an inspection (diagnosis), though the three work together. Most repair jobs start with an inspection and a camera look at the flue. Call (866) 942-9240 for an exact quote; estimates are free.
A cap replacement or a flashing repair often finishes the same day. Crown and masonry repairs run longer, usually one to three days depending on the extent. A full reline is a full-day job or more, since it involves the camera, the liner run, and the top and bottom connections. The written estimate sets the schedule before work begins.
Most chimney repairs in Killeen fall between $250 and $1,800, with cap work near $180-$450 and a full reline from $2,400 up. The range depends on the height and reach, the extent of the damage, and the parts involved. The written estimate sets the final price. Call (866) 942-9240 for an exact quote; estimates are free.
Yes. We install DuraFlex flexible liner systems and use HeatShield for flue resurfacing, along with Gelco and Olympia Chimney components. These are trade-recognized products sourced from professional supply chains. Our technicians have up to 11 years of experience with both liner and resurfacing work.
Same-day service is often available for booked repairs, depending on the schedule and the scope. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. Call (866) 942-9240 and we’ll book the earliest opening that fits.
Yes, the work is backed and the estimate is written so the scope and price are clear before we start. Licensed and insured, with a photo report of what was found and what was done. If you have questions after the job, call and we’ll walk you through the footage again. Call (866) 942-9240 for details on your specific repair.
Clear access to the fireplace and the hearth, and move any fragile items away from the work area. Let us know if there’s a chimney cap you want inspected, or a roof area you’re concerned about. If you’ve had a chimney fire, tell us when you call. Our technicians handle the rest.
Schedule Your Chimney Repair Service in Killeen Today
Book your chimney sweep Killeen visit, a chimney inspection, or start with a chimney repair estimate and we’ll take it from there. Sweep, repair, and inspection under one specialist roof means one call, one crew, and one clear diagnosis. Call (866) 942-9240 for a free, no-obligation written estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Killeen.