Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Temple, TX
We provide independent Gelco service across Temple, from original masonry fireplaces near downtown to builder-grade metal fireboxes in the newer subdivisions. The one thing that makes our Gelco work in Temple different is that we expect both chimney types on the same route, so every visit starts with a camera inspection rather than an assumption about what’s inside. Our technicians have up to 11 years of experience, and they work on Gelco flues, caps, and fireboxes with quality parts that fit. Call (866) 942-9240 for a free estimate.
Why Temple Residents Choose Us for Gelco Service
Gelco caps and prefab fireboxes show up throughout Temple, and we’ve learned their particular wear patterns through hands-on work rather than a manufacturer training course. We’re an independent shop, not affiliated with Gelco, and that independence keeps our advice straight: if a firebox panel can be repaired, we repair it; if the refractory damage is too widespread, we say so.
Local scheduling matters here because Temple is a two-market city. A single day’s route can run from a 1950s bungalow near downtown out to a 2000s tract home in the southern ZIPs, and the work at each address looks nothing alike. We plan for that instead of treating every fireplace like a basic sweep.
What you get on every visit: a camera inspection with photos you can see for yourself, a flat price agreed before we start, and no recommendation for liner or masonry work that isn’t backed by evidence. Call (866) 942-9240 to set up a visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Temple
- Rusted chase covers and cap corrosion. Temple’s heat and humidity cycles work on exterior Gelco chase covers until fasteners rust and seams open. That lets water into the chase, which shows up later as stained ceilings or a musty smell. Cap replacement is often the whole fix.
- Glazed creosote inside Gelco 2100 Series fireboxes. Occasional oak burning, followed by eight months of idle time, lays down a hard glaze that a brush alone won’t move. We remove it mechanically before it becomes a fire hazard.
- Seized dampers and smoke shelves. In converted or bricked-up Gelco fireplaces around older Temple homes, the damper assembly can seize or warp after years of non-use. A Level 2 inspection is the only way to see what’s sitting on the smoke shelf.
- Cracked firebox panels and failed refractory mortar. Thermal cycling plus moisture over the long idle season cracks prefab panels. Once water is getting in, a sweep alone won’t solve it; the panels need repair assessment.
- Nesting debris and blocked flues. Birds and squirrels find an open or failed cap quickly. When the first cold snap hits, that blockage shows up as smoke backup or a carbon monoxide alarm. A cap check and flue cleaning close the door on it.
Gelco Service in Temple: What Local Conditions Mean for Your Equipment
Temple’s housing stock splits right down the middle, and that split decides what a Gelco chimney actually needs. In the older neighborhoods just off downtown, many Gelco fireplaces were bricked up or converted to gas logs decades ago, yet they still hold the original damper and smoke shelf assemblies packed with creosote and soot from the 1970s and 80s. Nothing about that hazard is visible from the hearth. A Level 2 camera inspection is what reveals it, and the findings usually point to mechanical creosote removal plus a damper repair or replacement.
Out in the newer builds in the southern and western parts of Temple, the story flips. Wood burning is rare, so creosote isn’t the problem. Instead, the chase covers, caps, and firebox panels on those prefab units take the hit from Central Texas heat and wind, and the eight-month idle season gives moisture time to work. For those homes, cap replacement and firebox repair come first. Mixing up the two approaches wastes your money.
Gelco Models & Products We Service in Temple
We work on the Gelco equipment most often found in Temple homes: the Gelco 2100 Series prefabricated metal firebox, the Gelco 3000 Series wood-burning fireplace insert, and the Gelco Secure-Top multi-flue cap. That covers the flues, caps, and fireboxes we inspect, sweep, and repair.
For parts, we look for OEM-equivalent Gelco replacement dampers, caps, and firebox panels first. When those aren’t available, we use quality aftermarket parts only where they meet or exceed the original fit and safety specs. We’re an independent shop with no manufacturer affiliation, so a part gets chosen on whether it fits your unit and does the job. For older Gelco fireplaces with widespread refractory or chase damage, we give you a straight repair-or-replace assessment rather than selling parts that won’t fix the cause.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Temple
A standard Gelco chimney sweep and Level 1 inspection in Temple typically runs $150 to $300 depending on access and how much buildup is inside. A Level 2 camera inspection usually falls in the $200 to $450 range. Cap replacement for a Gelco Secure-Top multi-flue cap is often $150 to $450 installed. Damper repair or replacement generally lands between $250 and $700. Refractory and firebox panel repairs vary widely with the damage, so those are quoted per job.
What drives the number: the condition of the flue, how hard the creosote is, whether the cap needs replacing, and how much repair the panels need. Your free estimate includes the inspection findings with photos, a written scope, and a flat price agreed before any work begins. Call (866) 942-9240 for that estimate. We answer 24/7.
Serving Temple, TX – Our Local Coverage Area
We serve Temple and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Temple
Yes. Converted fireplaces still hold soot and creosote from the wood-burning years, and a gas conversion often leaves the original damper and smoke shelf untouched. In Temple, many of these conversions date back decades, so a camera inspection is the only way to confirm what’s sitting in the flue. Call (866) 942-9240 to book one.
Heat expands the metal, humidity corrodes the fasteners, and strong wind works a loosened cap loose. That cycle is hard on exterior chase covers in Central Texas. A properly sized, correctly fastened replacement cap holds up far better. Call (866) 942-9240 for an assessment.
We run a camera through the flue and inspect the firebox panels, damper, smoke shelf, and cap. You see the photos before we recommend anything. The report tells you whether a sweep is enough or whether repair is needed. Call (866) 942-9240 to schedule.
Yes. Metal fireboxes cool faster and tend to build glaze in tighter areas, so we use mechanical removal suited to the panel surfaces rather than masonry brushes alone. Heat and idle seasons both affect how hard the creosote sets. Call (866) 942-9240 for an exact quote on your unit.
Moisture is getting in, usually through a failed chase cover, a loose cap, or a cracked panel. The long idle season gives it time to spread. A cap check and camera inspection will find the source. Call (866) 942-9240. Estimates are free.
Service Areas Near Temple
Alongside Temple, we service Gelco chimneys in Belton and Nolanville, plus Killeen, Harker Heights, and Copperas Cove. If you’re in one of these communities, call (866) 942-9240 and we’ll set up a visit. For more on our Gelco work, or our coverage of Temple, ask when you call.
Book Your Gelco Service in Temple Today
If your Gelco chimney needs a sweep, a cap replacement, or a Level 2 inspection, call (866) 942-9240 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect first, show you the photos, and quote a flat price before any work starts.
Written by the team at Chimney Sweep Killeen.