Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Killeen Homeowners
Most chimney problems in Killeen stay invisible until they’ve already done damage. A cracked flue tile behind the mortar, a cap that lifted in a spring windstorm, creosote packed a quarter-inch thick above the smoke shelf: none of it shows from the living room, and none of it announces itself before it matters. Our technicians have up to 11 years of experience and a single-trade focus, and we run a certified camera down the flue so you see what we see rather than taking our word for it. Same-day inspection is often available in Killeen. Call (866) 942-9240 for a free estimate. We answer 24/7.
Fireplace Inspection
Fireplace Inspection covers the whole assembly, not just the firebox: the firebox and its brickwork, the damper and its frame, the smoke chamber, the flue above it, and the cap and crown on the roof. You need one when you’ve just bought a house in Killeen, when it’s been several seasons since the last sweep, or when smoke rolls into the room instead of going up. We check the damper seal, look for open joints in the smoke chamber, and confirm the firebox isn’t spalling from repeated heat cycles. We use HeatShield resurfacing when the smoke chamber has eroded but the masonry behind it is still sound. A standard fireplace inspection in Killeen runs roughly $150 to $275, and the written estimate sets the final price. Call (866) 942-9240 for an exact quote.
What the Firebox Check Covers
We look for cracked firebrick, failed mortar joints, and gaps where heat can reach the wood framing behind the surround. Those gaps are the ones that matter most in a wood-burning fireplace, and they’re also the easiest to miss from inside the room.
Damper and Smoke Chamber
A damper that won’t close flat leaves you heating the neighborhood instead of the house. We test the damper plate and its frame, then inspect the smoke chamber for the rough, ledge-like surface that catches creosote and slows draft.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services at Chimney Sweep Killeen split into three tiers: a basic visual check, a camera-assisted inspection of the flue and connected appliance, and the full Level 2 with a rooftop walkaround. You need a basic inspection before the first fire of the season, a camera inspection if you’ve had a chimney fire or a liner concern, and a Level 2 whenever a property changes hands. Every inspection includes a photo report of what we found, so nothing depends on memory. Chimney Inspection Services in Killeen typically run $150 to $450 depending on the level, with the written estimate setting the final price. Call (866) 942-9240 for a free estimate.
Choosing the Right Inspection Level
A first-time homeowner with an unknown chimney usually needs the camera-assisted version, because a visual check can’t see past the smoke shelf. A homeowner with an annual routine and a clean history can often stay with the basic check.

What the Report Tells You
We mark each defect, photograph it, and tell you plainly whether it needs work now, needs watching, or can safely wait. Nothing is recommended without camera evidence you can look at yourself.

Chimney Flue Inspection
Chimney Flue Inspection is a close look at the inside of the flue itself: the tile liners, their joints, the mortar between courses, and any gaps where the flue passes a floor or ceiling. It’s the part an ordinary sweep can’t see, and it’s where most serious defects live, because flue tiles crack from heat stress long before anything visible changes on the outside. We run a specialized camera the full length of the flue and photograph every joint. If tiles are cracked or spalling, we’ll talk you through whether HeatShield resurfacing can restore the existing liners or whether a DuraFlex flexible liner is the more reliable fix. A flue inspection in Killeen usually falls in the $175 to $300 range, and the written estimate sets the final price.
Tile Cracks and Joint Gaps
A hairline crack in a flue tile lets heat and combustion gases reach framing and insulation that were never meant to see either. We map where the cracks are and how wide, because a single shallow chip reads very differently from a split running the tile’s length.
Gaps Behind the Facing
Older construction in this part of Texas sometimes leaves space between the flue and the framing where the facing meets the chimney breast. A camera pass catches those openings before they become a fire path.
Chimney Fire
Chimney Fire damage is often partially hidden, which is why a post-fire inspection is a different job from a routine one. Creosote builds up on the flue walls over a season of burning, and when it ignites it can burn hot and fast enough to crack tiles, warp a damper, or scorch the smoke chamber before anyone notices more than a loud roar and a smell. You need an inspection after any chimney fire, however small it seemed, and also if you’ve heard that low rumble a few times and written it off. We check the flue for heat damage and dislodged tile, test the damper, and inspect the crown and cap. A post-fire inspection and cleanup in Killeen generally runs $250 to $450 depending on damage, and the written estimate sets the final price. Call (866) 942-9240.
Signs a Chimney Fire Happened
Puffy, honeycombed creosote, discolored metal on the cap, or a warped damper are all evidence that flame went where it shouldn’t have. Homeowners often miss these because the fire itself was brief.
What We Check Afterward
We run the camera the full length of the flue and check the tile joints for heat damage. Cracks that open after a fire are the ones that let the next fire reach the structure.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the standard required when a property changes hands, when an appliance or fuel type changes, or after a chimney fire or earthquake. It covers everything a basic inspection does plus a full camera scan of accessible flue areas, and it includes a walkaround of the chimney exterior and accessible portions of the attic and crawl space. In Killeen, this is the inspection that turns up the problems a buyer needs to know about before closing. We photograph each finding and label it, and we tell you plainly when work can wait. A Level 2 inspection in Killeen typically runs $250 to $450, and the written estimate sets the final price. Call (866) 942-9240 for a free estimate.
What Level 2 Adds
The camera scan is the heart of it, but the exterior walkaround matters just as much: crown cracks, flashing, and cap condition all get photographed. We also check the chimney’s clearances to combustible materials where they’re accessible.
When It’s Required
Most real estate transactions involving a wood-burning appliance call for a Level 2, and some insurers ask for one on a new policy. We give you a written report you can hand to a lender, an insurer, or an attorney.
Chimney Leak
Chimney Leak diagnosis starts with finding the actual entry point, because water almost never comes in where the stain shows up. In Killeen, most leaks trace to a cracked crown, failed flashing where the chimney meets the roof, or a missing or rusted-out cap. The stain on the ceiling inside is usually a few feet from the real problem. We inspect from the roof down, check the crown for splits, test the flashing, and look at the cap and chase cover. Repair pricing depends on the cause: crown repair or cap replacement is on the lower end, while flashing replacement runs higher, with the written estimate setting the final price. Call (866) 942-9240. We answer 24/7.
Crown Cracks and Cap Failure
The crown is a concrete top surface that sheds water away from the flue. When it cracks, water goes straight down the outside of the flue and into the attic. A missing cap lets rain straight into the chimney itself.
Flashing and Roof Joints
Flashing is the metal that seals the chimney to the roof. It lifts with heat and wind over time, and once it separates, water runs down the chimney’s outside face and into the framing.
Chimney Camera Inspection
Chimney Camera Inspection is what separates a real diagnosis from a guess. We lower a specialized camera down the flue and watch it on a monitor in real time, recording the whole run and photographing every joint, offset, and defect along the way. It’s the tool that shows whether a flue has a cracked tile at the smoke shelf, a gap at a floor penetration, or heavy creosote glazing higher up. We recommend it for any home with an unknown service history and for any chimney that’s had a fire. A camera inspection in Killeen usually runs $175 to $325, and the written estimate sets the final price. Call (866) 942-9240 for a free estimate.
Reading the Camera Feed
You watch the monitor with us. When we point at a crack or a joint gap, you see the same thing we do, which is why we don’t ask you to take a repair recommendation on faith.
What the Recording Captures
We record the full flue scan and photograph each finding individually, then attach those images to your written report. You keep a copy for your records or for a buyer.
Brands We Service
We work with DuraFlex flexible liner systems for relining jobs where the existing flue can’t be salvaged by resurfacing alone. DuraFlex liners go in around offsets and bends that rigid liners can’t follow, and installing one takes tooling and training most generalists don’t have. We also work with HeatShield for chimney resurfacing, a product made specifically to restore deteriorated flue tiles without demolishing the chimney, and with Olympia Chimney components for caps and related parts.
Gelco is another name we work with when a repair calls for it, sourced through professional supply chains rather than a big-box shelf. Whether your chimney has DuraFlex, HeatShield, Gelco, Olympia Chimney, or any other make, we can help. One call covers sweep, repair, and inspection, so you’re not coordinating three contractors for one chimney.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling into the room. A fireplace that smokes steadily is usually a draft or flue obstruction problem, not a damper you’re using wrong. It’s worth a camera inspection before you burn again.
- A strong creosote smell in warm weather. Creosote that smells sharp in summer is often heavy enough to need a sweep before the next season. It’s also the fuel a chimney fire feeds on.
- Water stains on the ceiling or chimney breast. A stain means water is already inside the structure. Finding the entry point early usually keeps the repair small.
- Visible cracks in the firebox or flue tiles. Cracks let heat reach framing. That’s a safety issue, not a cosmetic one, and it needs a camera look before the next fire.
- Birds, debris, or a missing cap. An open flue invites nests, and a nest blocks draft and catches sparks. A cap replacement settles it.
Our Process, Step by Step
- 1
Book and confirm. We take your details, ask what kind of appliance you have, and schedule a visit. We work Sunday through Friday, fast dispatch from 7am to 7pm, and the estimate is free.
- 2
Arrive and assess from the ground. We start outside: crown, cap, flashing, and the chimney’s overall condition from the roof line. That first pass tells us where to focus inside.
- 3
Sweep and inspect the firebox. We clean the firebox and smoke chamber, check the damper, and photograph anything that looks worn or cracked.
- 4
Run the camera. A specialized camera goes down the full flue. We watch it live, record it, and photograph every defect, offset, and joint we find.
- 5
Walk you through the report. We show you the photos, explain what needs attention now and what can wait, and leave you a written estimate. Nothing gets recommended without camera evidence you can see.
How Much Does Chimney Inspection Cost in Killeen?
Chimney inspection in Killeen typically runs $150 to $450 depending on the level of inspection and what we find. A basic visual inspection with a firebox and damper check sits at the low end, around $150 to $250. A camera-assisted flue inspection lands in the $175 to $325 range. A full Level 2, with the camera scan plus exterior and accessible attic and crawl space review, runs roughly $250 to $450.
What moves the price: the height and accessibility of the chimney, whether the flue has offsets that slow the camera run, whether we find a defect that needs a follow-up look, and whether you’re combining the inspection with a sweep. Combining a sweep and inspection in one visit usually costs less than booking them separately.
How to avoid overpaying: get the inspection level named in writing before anyone starts, ask whether a camera scan is included, and ask for photographs of any defect you’re told needs repair. If a technician can’t show you the problem on camera, don’t authorize the work.
What’s included in a free estimate: our inspection findings, the photographs, a clear recommendation of what needs work now versus later, and a written price for anything we’d do. The estimate is free and the price is set per job by the written estimate. Call (866) 942-9240 for an exact quote.
Our Service Area Near Killeen
We inspect chimneys across Killeen and the surrounding towns, including Fort Hood, Harker Heights, Nolanville, Copperas Cove, Kempner, Belton, Temple, Morgan’s Point Resort, and Sonterra. Travel times vary with the route, but most nearby visits get scheduled quickly. If you’re just outside these towns, call and we’ll confirm coverage for your address. You can also read more about our Killeen service area and the surrounding communities we reach.
Serving Killeen, TX – Our Local Coverage Area
We serve Killeen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Killeen
A chimney inspection is an assessment of the firebox, damper, flue, and exterior for defects that affect safety or performance. It’s different from a sweep, which cleans the flue, and from a repair, which fixes what the inspection finds. We photograph and document everything we see so you have a record. Call (866) 942-9240 for an exact quote; estimates are free.
Most inspections take 45 minutes to an hour and a half, with Level 2 jobs at the longer end. A basic visual check moves quickly; a camera scan and rooftop walkaround add time. Combining a sweep with the inspection usually adds only a little. Call (866) 942-9240 to book a time that works.
Chimney inspection in Killeen runs about $150 to $450 depending on the level. Camera-assisted flue inspections sit around $175 to $325, and full Level 2 inspections around $250 to $450. The written estimate sets the final price. Call (866) 942-9240 for an exact quote; estimates are free.
Yes. We install and service DuraFlex flexible liner systems, which work around offsets and bends that rigid liners can’t follow. We also work with HeatShield resurfacing when the existing tiles can be restored instead of replaced. If you’re not sure which your chimney needs, the camera scan tells us. Call (866) 942-9240 to schedule.
Same-day inspection is often available in Killeen, depending on the schedule. We dispatch Sunday through Friday, 7am to 7pm, and we’re closed Saturday. We answer 24/7, and a call outside dispatch hours is booked into the next opening. Call (866) 942-9240.
Our repair and installation work carries a satisfaction guarantee: if something we installed or repaired isn’t right, we come back and make it right. Inspection findings and repair recommendations are documented in writing. The terms are spelled out in your written estimate. Call (866) 942-9240 with any questions before you book.
Clear the hearth and the area in front of the fireplace so we have room to work, and move any furniture or decor that blocks access. Make sure we can get to the roof access point and, for a Level 2, the attic and crawl space. Don’t burn for at least 24 hours before the visit. Call (866) 942-9240 if you’re unsure what to clear.
Schedule Your Chimney Inspection Service in Killeen Today
A camera inspection takes about an hour and tells you what your chimney actually needs, without guessing and without being sold work you can’t verify. Our technicians have up to 11 years of experience, we’re licensed and insured, and every recommendation comes with a photo you can see for yourself. Call (866) 942-9240 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Killeen.